Changes 1 7 3

1. Notable changes in PrestaShop 1.7.6 CLDR. The CLDR is a component responsible of displaying data such as the date & time, prices depending on a given language. It was reworked during several versions of PrestaShop 1.7, and will be enabled with 1.7.6. The previous one has been removed, and trying to use it will end to an exception.
2. All notable changes to this package will be documented in this file. 1.7.1 - 2021-08-05 Fixed. TypeConversion primitive converters now perform a direct C# cast instead of clamping. 1.7.0 - 2021-02-26 Added. Added overloads to TypeConversion.Convert and TypeConversion.TryConvert to pass the source as a ref to avoid creating copies during.

The following changes were made in Oracle NoSQL Database 12cR1.3.1.7.

C# 7.1 was released in August 2017 as part of the 15.3 update for Visual Studio 2017, and C# 7.2 was released in December 2017 with Visual Studio 2017 15.5. Unlike new language releases in the past, this time their new features are not automatically enabled after updating Visual Studio; neither in existing projects, nor when creating a new project. UFC 3-600-01 8 August 2016 Change 1, 28 November 2016. Navy Unification Issues:. Paragraph 7-2 – The spacing allowed by the IBC for the identification of the rated wall is too large and will not be easily seen by trade personnel performing work. Paragraph 9-7.6.3.2 – There are too many issues with CPVC piping to allow it to. Known issues in the release. Dependency, license and distribution changes. Apache Subversion 1.7 is a superset of all previous Subversion releases, and is as of the time of its release considered the current 'best' release. Any feature or bugfix in 1.0.x through 1.6.x is also in 1.7, but 1.7 contains features and bugfixes not present in any.

New Features

1. Added a convenience method on the Table interface to construct a MultiRowOptions instance from a single list of table names and optional FieldRange. [#23807]

2. Added FieldRange.getField() to return the FieldDef instance that was used to construct the FieldRange object. [#23908]

Bug and Performance Fixes

1. Fixed a problem that caused index creation on an empty table to take as much as 10 minutes to complete. [#23826]

2. Fixed a performance regression in the CLI delete command. This fix may result in some delete commands being slower because the problem was an optimization for some delete cases, but in the general case delete will have the same performance it had in release 3.0.5. [#23918]

3. Removed unnecessary non-topology metadata broadcasts to replica rep nodes. Since only a master rep node can update the metadata for the shard there is no point in attempting to update a replica. With this change two new admin parameters have been added to control the metadata broadcast:

   • broadcastMetadataDelay specifies the broadcast metadata retry delay. This delay is the time between attempts to update RNs when trying to meet the metadata threshold. If not specified, the default delay is 10 seconds.

   • broadcastMetadataThreshold specifies the broadcast metadata threshold. The threshold is the percent of shards that must be successfully updated during a broadcast. If not specified, the default threshold is 20%.

   Note that this fix only affects the broadcast of table and security metadata. The topology broadcast parameters and behavior remain unchanged. [#23362]

• 12.19.6
• 22.19.2
• 32.19.1
• 42.0.0
• 51.7.5
• 61.7.4
• 71.7.3
• 81.7.2
• 91.7.1
• 101.7.0
  • 10.1Changes
• 111.6.2
• 121.6.1
• 131.6
• 141.5.3
• 151.5.2
• 161.5
• 171.4.1
• 181.4.0
• 191.3.0
  • 19.4MatterSlice
• 201.2.2
• 211.2.1
• 221.2
• 231.1.3
• 241.1.2
• 251.1.1
• 261.1.0

This page contains a brief description of each new release of MatterControl. The version numbers shown on this page are for the official MatterHackers releases. Path finder 8 5 2 0.

2.19.6

Release Date: June, 10, 2019

Changes

• Printer setup dramatically improved with new unified experience
  • Show outstanding tasks and progress
  • Leveling visualization
• Dual extrusion improvements
  • New Nozzle Calibration Wizard (for calibrating dual extrusion printers)
  • Support for custom wipe tower shapes
  • Improved support material detection
• UI improvements
  • Faster updates in Cloud Library folders
  • Restore UI on re-open
  • Better Keyboard navigation support
• New error detection and warning system
  • More hardware errors handled
• Design tools improvements and optimizations
  • New Twist tools
  • Improved Curve tool
  • Improved Align
• Many bug fixes and optimizations

2.19.2

Release Date: February, 6, 2019

• [Mac Download]
• [Linux Download]

Changes

• Fixed bugs with exporting G-Code
• Improved flatten
• Improved Undo support
• Improved design history

2.19.1

Release Date: January, 2, 2019

• [Mac Download]
• [Linux Download]

Changes

• Versioning: Moving to a (version).(year).(month) version number. Easier to read and more informative.
• Multi-printer control
• A single instance of MatterControl can now run multiple printers simultaneously
• New State-of-the-art Subtract, Combine and Intersection
• We now start up with a 'Feature Tour' to help new users find their way

2.0.0

Release Date: November, 19, 2018

• [Mac Download]
• [Linux Download]

Changes

• Added Integrated Design Tools

1.7.5

Release Date: August, 14, 2017

• [Mac Download]
• [Linux Download]

Changes

• Added filament selection into leveling wizard so we heat to printing temp before sampling.

1.7.4

Release Date: July, 14, 2017

• [Mac Download]
• [Linux Download]

Changes

• Put in the ability to ramp the extra extrusion after move to compensate for oozing while moving.

1.7.3

Release Date: July, 6, 2017

• [Mac Download]
• [Linux Download]

Changes

• Created regex filters that can be applied to printer read and writes. Allows us to support more printers.

1.7.2

Release Date: June, 19, 2017

• [Mac Download]
• [Linux Download]

Changes

• Fixed bug in leveling for JumpStart printer

1.7.1

Release Date: June, 11, 2017

• [Mac Download]
• [Linux Download]

Changes

• New mesh bed leveling option (3x3)
• Improved tool pathing while printing supports
• Improved wipe towers while printing support
• Improved extruder selection when more than 2 extruders available
• Fixed small over extrusion issues with some overhang tool paths
• Added support for filament run out sensor
• New SMS messages for pausing and filament run out
• Added support for automatic probing if sensor available
• Added Support for probing servo
• Improved translations
• General bug fixing

1.7.0

Release Date: March 14, 2017

Changes

• Significantly improved tool paths, much better printed parts
• Improved macro support
• Improved baby stepping
• Updated to latest avrdude for improved compatibility with some non-standard boards
• Improved support for network printing
• Touch screen mode now works on all platforms
• New printing screen in touch screen mode
• Better screen position saving and restoring

New translations added

• Čeština
• Dansk
• Italiano
• ελληνικά
• Norsk
• Русский
• Română
• Vlaams

Updated existing translations

• English
• Deutsch
• Español
• Français
• Polski
• Türkçe

Bug Fixes

• Increased hardware error reporting
• Improvements to Repetier communications

1.6.2

1 Divided By 7

Release Date: January 18, 2017

Changes

• All printing instructions now sent with checksum
• Improved macro scripting and macro execution
• Disconnect and Reconnect does not cancel a print (can still be recovered)
• Improvements to language for dialogs and menus
• Record recover count in history
• Added error messages when saving files fails

Bug Fixes

• Fixed a problem with controlling multiple extruders that shared temp
• Fixed problem when changing colors on some dialogs
• Improved Android stability
  • Switched from HTTP client to WebRequest
  • Improved Queue logic to be more MVC and eliminated crash

1.6.1

Release Date: December 6, 2016

Changes

• Request updated printer list from MatterHackers.com immediately on program startup.
• Show import printer Wizard after user logs in for the first time after updating.

1.6

Release Date: November 21, 2016

New Features

• Print Recovery
  • Automatically recover from power failure, disconnection, or crash
• Printer settings now associated with user account and accessed when logged in
• Settings changes automatically synced across instances of the application
• Improved Settings Editor
  • Revert to default profile settings at any time
  • Revert to previous version of settings
• Improved Quality and Material Editors
• Improved Export and Import of settings
• Printer profiles added
• Calculate filament cost per print
• Part editing now has undo and redo
• Latest settings now retrieved the when setting up a new printer

Better Print Results

• Fill Thin Gaps
• Expand Thin Edges
• Perimeter Merging
• Improved wipe towers
• Improved support detection and removal
• Improved seam hiding
• Convex priming (skirt) loops
• Better fan speed control
• Can use G0 instead of G1 for moves if desired

1.5.3

Release Date: May 19, 2016

New Features

• Added profile for the BCN3D Sigma printer
• Updated JumpStart V1 Printer Profile
• Added printer profile for the Lulzbot TAZ 6

1.5.2

Release Date: April 29, 2016

Bug Fixes

• Fixed Android keyboard crash on T10 tablet

Other

• Updated printer profiles

1.5

Release Date: February 19, 2016

New Features

• A new, vastly improved, support system
• Ability to slice merged/intersecting parts
• Improved seam-hiding while printing
• Ability to cancel printing while heating
• Made it possible to have the first perimeter have a different extrusion width to compensate for more accurate small holes
• Added top infill speed
• Add support for closing MatterControl while printing
• Put in reporting of hardware errors
• Improved the local search feature
• Added visual indicator for http failures
• Made it possible to render translucent extrusion paths
• Support drag and drop onto the settings widget will still add to Queue
• Fixed the macro window to grow in Y
• Implemented scroll wheel in the G-Code Terminal
• Added user configurable Library folders
• Finished Braille 2 functionality for Braille Builder
• Velocity during rotation of 3D View
• Improved MatterControl Touch printing
• Improved Android soft keyboard support
• Only process the most outside perimeter with Spiral Vase
• Fixed slicing to handle badly wound polygons

Bug Fixes

• Now reporting bed and extruder heating state for Repetier firmware
• You can now type a partial entry to a count or mm field and not have it get messed up if you are slow
• Make sure we turn off all heaters when we shut down
• Ability to save to the Queue on Save As
• Suppress error reporting and abort on COM Access Denied errors
• AMF save progress reporting
• Fixed first layer speed issue
• Better thread safety
• Made the leveling page easier to use on MatterControl Touch
• Made message box easier to use on MatterControl Touch
• Allow invalid image file formats to return a load failure rather than throw an assert
• Group objects move correctly on the bed when scaled
• Made it possible to edit the 3 point leveling positions even after you have set up 7 or 13 point leveling
• Making the save feature always go through a separate file so that we don't get collisions with files in use
• No crashing on corrupt zip files
• Fixed bug when opening and closing EEProm window
• Restore Clear Cache functionality
• Loading large GCode file no longer pauses Android
• Loading Repetier EEProm settings no longer pauses Android
• Fixed issue where Infill Overlap was not being used correctly

See also

MatterControl 1.5 Released article on MatterHackers.com

1.4.1

Release Date: November 16, 2015

Notes: MatterControl Touch only

Minor Changes

• Enabled new seam hiding code in MatterSlice
• Enabled 'Pinch to Zoom' on touchscreens
• Reset view button on model and gcode views
• Improved STL repair, added handling for bad polygon winding
• Added Outside perimeter extrusion width setting (Filament -> Extrusion)
• Added Top Solid Infill speed to MatterSlice
• Improved to Braille Grade 2 support in Braille Builder
• Made print leveling dialog easier to use on Touch
• Made message reports easier to read on Touch

Bug Fixes

• Improved showing and hiding of the Android keyboard
• Better startup behavior when a printer plugged in
• Fixed issue where grouped objects were not moving when scaled
• Android now resets boards on connect
• Fixed issue where Infill Overlap was not being used correctly
• Fixed issue with empty Start GCode
• General stability improvements

1.4.0

Release Date: October 5, 2015

New Features

• Added Cloud Design Library - automatic design file syncing
• Expanded general library management tools (folder creation, item rename)
• Added options for sharing designs
• Added support for X3G 3D printers (added new profiles)
• Added ability to start/stop prints remotely and remotely add items to queue
• Added 'Braille Builder' design add-on for creation of 3d printable braille labels

1.3.0

Release Date: June 23, 2015

New Features

• Auto arrange has been improved
• Added profiles for MakerGear, PrintSpace, Huxley
• Adding Touchscreen mode for touchscreen devices
• Support for ATX power hardware
• Improved Basic and Standard UI settings
• Perimeters, Bottom and Top layers can all be set in millimeters
• Perimeters can now be printed outer layer first or last

Minor Changes

• Updated Lulzbot settings
• Added tool change g-code
• Added crash reporting to alpha and beta channels
• Better default printer naming
• Fixed slicing problems with very complex models during top and bottom layer creation.

Bug Fixes

• Fixed issue with spiral vase setting
• Fixed bug with dual extrusion offset (offset values were limited to integer values)
• Fixed slicing problems with very complex models during top and bottom layer creation
• Improved reset connection
• Keep 3D views up to date with model changes
• Fix to end gcode processing not doing replacements
• Improved error messages
• Fixed handling of bad AMF loading
• Better handling of connection not available
• Fixed a bug in the queue while printing and trying to change items1
• Fixes for international number formatting
• Improved clarity of redundant slice settings naming
• Fixed a problem with first layer extrusion width

MatterSlice

Features

• Added a wipe before retract feature
• Made it possible to print the raft with any extruder

Bug Fixes

• Filter move writes better
• Spiral Vase now ignores confounding settings when set
• Outer perimeters can no longer overlap themselves
• Improved loop clipping
• Put in tool change code
• Print the skirt before the raft
• Hex infill could sometimes miss a bottom edge
• Fixed a freeze bug when creating top and bottom layers for complex parts
• Make sure we retract on layer change if required
• Extruder offset previously could only be an integer value (it can now be a decimal value as well)

1.2.2

Release Date: March 6, 2015

New Features

• Improved printer connection stability
• Updated Serial Driver for RAMPS
• Added profiles for Revolution 3D, Solidoodle
• Added hexagon infill
• Added the ability to turn on 'Reset Connection' works as an e-stop

Minor Changes

• Bug fixes
• Better memory reporting and stability
• Fixed a bug with temp being set repeatedly
• Using sub-modules (easier to build from GitHub)

1.2.1

Release Date: January 28, 2015

New Features

• Pop Out Windows - now you can show settings and controls all the time
• Ability to send parts to other computers and MatterControl Touch
• We now display a big 3D view on startup
• Better connection handling
• Support for many more printers
• Added a Simple mode to slice settings

Minor Changes

• External Perimeter First slice setting
• Improved edge detection during slicing
• Select Raft Extruder
• Vertical offsets in edit mode
• Faster editing of models
• More accurate gcode generation
• More accurate support angles
• Better slice settings help and defaults
• Fixed some very obscure errors with Print Leveling being too high sometimes
• Better detection of co-linear edges (highly tessellated round things work better)

1.2

Release Date: November 19, 2014

New Features

• Dual-Extrusion Support
• Simple Multi-Material Workflow
• Advanced Support Material Generation
• New Touch-Friendly UI
• Signed Windows Drivers (no more Windows 8 pain)
• AMF support

Minor Changes

• Improved Pausing (remembers and returns to pause position)
• Support for @pause and M226 (user requested pause from gcode)
• MatterSlice
  • Skirt always draws from the outside

1.1.3

Release Date: August 8, 2014

• Windows Download - last XP compatible build

New Features

• Updated to Slic3r 1.1.7
• MatterSlice significantly improved
  • Support can now have interface layers
  • Many bugs and performance improvements
• New 3D Display options (outline view)
• MakerBot X3G support now available (beta)
• Added Turkish translation

Minor Changes:

1.2

Release Date: November 19, 2014

New Features

• Dual-Extrusion Support
• Simple Multi-Material Workflow
• Advanced Support Material Generation
• New Touch-Friendly UI
• Signed Windows Drivers (no more Windows 8 pain)
• AMF support

Minor Changes

• Improved Pausing (remembers and returns to pause position)
• Support for @pause and M226 (user requested pause from gcode)
• MatterSlice
  • Skirt always draws from the outside

1.1.3

Release Date: August 8, 2014

• Windows Download - last XP compatible build

New Features

• Updated to Slic3r 1.1.7
• MatterSlice significantly improved
  • Support can now have interface layers
  • Many bugs and performance improvements
• New 3D Display options (outline view)
• MakerBot X3G support now available (beta)
• Added Turkish translation

Minor Changes:

• Make sure the 3D views always match the current printer size and shape
• Improved 3D GCode view (more display options)
• Faster Mesh and GCode loading
• New driver for RoBo 3D
• Made Smoothieboards work better

1.1.2

Release Date: July 22, 2014

New Features

• 3D GCode View
• Cloud Monitoring: While logged in, printer status viewable from the web
• SD Card Support: Allows you to print from and view/edit the contents of the on-board SD Card
• Triangle infill in MatterSlice, for incredibly strong parts

Minor Changes

• Minor UI fixes (ex. added scroll bars to slice presets)
• Added 'Preheat' temperature preset - sets temp to current slice settings
• Fixed slice implementation of Raft settings. It was not putting in correct spacing
• Fixed issue with update download not starting.
• Fixed issue with auto-connect causing start-up crash (on Printrboards specifically)

1.1.1

Release Date: May 27, 2014

New Features

• New Advanced Raft in MatterSlice
• GCode playback during printing

Minor Changes

• Independent Axis Scaling Improved
• Fixed a bug in Macros being sent in reverse order
• Better international support (
• Bug fixes and performance improvements

Changes 1 7 3 Beta

1.1.0

Release Date: May 14, 2014

New Features

• MatterSlice : A new high quality, high speed slicing engine by MatterHackers
• Material/Quality Presets : Layers settings to that modify the base settings
• Widescreen Mode
• Expanded Themes
• Image Converter : A new tool that lets you change images into printable models
• Print History updates and improvements

Minor Changes

• Pause, cancel, resume functionality can now be assigned custom GCode.
• Added visualization for retraction and partial path viewing to GCode view.
• When parts are repositioned in the plate editor, the offsets are now preserved.
• Localization support has been added. We'll be integrating translations as they become available.
• Saving part file edits is now significantly faster.
  • Loading images is now faster (uses caching).
  • Many bug fixes and performance improvements